Simulates YSI 400 Series Probe with 3 temperature outputs and 3 delta temperatures at 11 temperatures. Click here for Temperature Simulator Cables.

Selected Information:

Triple Outputs and Delta Temperatures.

Verify, test and calibrate temperature monitors that use YSI 400 Series Thermistor Temperature Probes.

Simulate 3 temperatures simultaneously with 11 sets of values:
     T1: 37 to 47degrees C in one degree steps.
     T2: 37°C at all settings.
     T3: 32 to 42 degrees C in one degree steps.

Simulate 3 delta temperatures (Delta T) with 11 sets of values:
     Delta T1-T2: 0 to 10 C degrees in one degree steps.
     Delta T2-T3: +5 to -5 C degrees in one degree steps.
     Delta T1-T3: 5C degrees at all settings.

Temperature accuracy of +/-0.05 degrees C for all settings.

Cables are available to connect the Simulator to most temperature measuring instruments.

Certificate of Conformance traceable to NIST is available.

Additional Product Data:
Download the TP400/DT3 Product Data Sheet

Summary:
The TP400/DT3 Temperature Probe Simulator is intended primarily for testing and troubleshooting temperature measuring instruments that use up to three YSI* 400 Series Temperature Probes**. When substituted for the probes, the Simulator provides three precise and stable outputs for setup and calibration of temperature measurement instruments. It also simulates three temperature differences (Delta T) for testing instruments that display Delta T between two or three measurement channels. Since the Simulator eliminates the probes as variables, it helps determine whether measurement problems are caused by the probes or the measuring instrument.

Other useful applications of this Simulator include training personnel in the correct setup and operation of temperature measuring instruments and in quickly identifying malfunctioning temperature probes.

Cables are available to connect the Simulator to most temperature measuring instruments. Typical instruments are electronic thermometers, temperature monitors, incubators, hypothermia systems, and temperature controlled analytical laboratory instruments. Each Temperature Probe Simulator (TP400/DT3) requires from one to three Cables to connect it to the temperature measuring instrument.

 *     Yellow Springs Instrument Company, Inc.
**     Or equivalent probes such as: Omega, Sensor Scientific, Tegam, Thermometrics and others.